611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com features: ? exceptional temperature stability ? low video resistance (112 ? typical) ? flat output vs. frequency over broadband performance ? very fast pulse response ? no bias required ? flexible design options applications: ? transmitter monitoring ? missile guidance systems ? input to low-noise amplifiers ? broadband or narrowband ecm receivers ? power and signal monitors ? doppler radar and beacon receivers ? matched units available for mult i-channel receivers, amplitude comparator systems and discriminators minimum (2) flatness standard (5) frequency sensitivity vs typical (3) video standard optional range part (1) k frequency tss typical (4) capacitance case case (ghz) number (mv/mw) (+/-db) (dbm) vswr (pf) styles styles 0.005 - 0.5 actm1078n 800 0.2 -50 2.2:1 1000 m12 m35 0.05 - 0.5 actm1155n 700 0.3 -49 2.2:1 470 m35 m12 0.01 - 0.75 actm1080n 800 0.3 -50 2.4:1 1000 m12 m35 0.1 - 1 actm1037n 900 0.2 -51 2.3:1 270 m12 m34 0.5 - 1.3 actm1089n 900 0.2 -51 2.2:1 9 m 12 m34,m35,m47,m51 0.01 - 2 actm1069n 400 0.3 -49 1.5:1 1000 m12 m35 0.1 - 2 actm1071n 900 0.2 -51 2.0:1 75 m12 m35 0.5 - 2 actm1001n 900 0.25 -51 1.9:1 75 m12 m34,m47 1 - 2 actm1013n 850 0.2 -51 1.9:1 20 m 12 m34,m35,m47,m51 0.1 - 4 actm1073n 800 0.25 -50 2.0:1 75 m12 ? 0.5 - 4 actm1054n 800 0.35 -51 2.0:1 39 m 12 m34,m35,m47,m51 2 - 4 actm1002n 850 0.35 -51 2.0:1 39 m12 m34,m35,m47,m51 0.1 - 6 actm1017n 700 0.35 -50 2.2:1 75 m12 ? 2 - 6 actm1006n 900 0.4 -51 2.5:1 20 m12 m51 2 - 8 actm1007n 750 0.5 -50 2.5:1 20 m12 m51 4 - 8 actm1003n 800 0.35 -51 1.9:1 20 m12 m51 8 - 12 actm1012n 650 0.4 -50 2.0:1 12 m12 m51 0.5 - 18 actm1020n 600 1.25 -49 3.3:1 20 m12 ? 2 - 18 actm1009n 650 1.0 -50 3.0:1 20 m12 ? 6 - 18 actm1058n 700 1.0 -49 2.5:1 9 m12 m51 8 - 18 actm1066n 700 0.9 -49 2.5:1 9 m12 ? 1 - 20 actm1144n 600 1.3 -49 3.0:1 20 m12 m51 notes: 1) standard output polarity is negative. if positive output is required, substitute ?p? for ?n? in part number. 2) diode values can be changed to alter the le vel of sensitivity. as sensitivity is increased, vswr will degrade. vswr will i mprove as sensitivity is lowered. flatness and tss will also be influenc ed by these changes. if your applic ations require something spe cial, please contact the factory. 3) tangential signal sensitivity (tss) is a measure of low level sensitivity with respect to noi se. it is measured using a vid eo amplifier with a 20mhz bandwidth and a 3db noise figure. 4) vswr measured at or below -20dbm input power level. 5) video capacitance is used for rf bypass. this value can be changed if required for video response time or other considerati ons. contact the factory if value other than those shown are needed. the detectors listed are standard products. there are many possible variations, which can be selected as opt ions. package configurations can be changed if desired. performance charac teristics may be modified to meet special requirements (e.g. the sensitivity might be moved higher or lower with a corresponding effect on vswr). rf bypass capacitance values can be selected on some models. contact the factory for special needs. tunnel diode detector modules
611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com environmental specifications: screening : mil-e-5400, mil-std-202, mil-e-16400 standard screening : operating temp: -65c to +100c internal visual per mil-std-883, method 2017 storage temp: -65c to +100c temperature cycle: -65c to +100c, 10 cycles humidity: mil-std-202f, m103, cond b op tional high-rel screening (ref mil-prf-38534) : shock: mil-std-202f, m213, cond b internal visual per mil-std-883, method 2017 altitude: mil-std-202f, m105, cond b stabilization bake per mil-std-883, method 1008 vibration : mil-std-202f, m204, cond b temperature cycle per mil-std-883, method 1010 thermal shock: mil-std-202f, m107, cond a c onstant acceleration per mil-std-883, method 2001 temperature cycle: mil-std-202f, m105c, cond d burn-in per mil-std-883, method 1015 maximum input power: +14dbm leak test per mil-std-883, method 1014 (this allows for 3db margin from possible burnout at +17dbm) external visual per mil-std-883, method 2009 case style m12 case style m47 case style m51 case st yle m34 case style m35 part number ordering information: example: actm1002nm1220 actm1002: tunnel module detector, 2 - 4ghz n: negative output polarity m12: package type 20: 20pf custom video capacitance (omit for standard value) tm-0205 0.050 (3) plcs. 1 2 3 4 0.015.003 typ. 0.150 0.400 max. 0.210 0.180 sq. max. ground n/c output n/c ground n/c rf input n/c 8 7 6 5 4 3 2 1 pin function 0.005.002 0.080 max. 8 7 6 5 0.129 ?0.012 typ. 0.330 input 0.120 0.080 0.246 .003 output 0.250 0.120 0.058 typ. c l 0.004 x 0.020 min. (2) plcs. 0.020 max. (to flat) colored dot input 0.280.005 0.160 0.205.003 0.135 .010 (2) plcs. ?0.096.003 thru 0.126 .004 0.062.002 0.079.002 0.080 .001 ?0.500.002 ?0.450.002 0.200 0.185.015 0.031.003 0.050 max. 0.300.005 0.018.002 (4) plcs. 453 typ. rf in n/c video out gnd rf in video out n/c gnd ?0.360.002 ?0.300.002 0.160 0.185.015 0.031.003 0.034.005 453 typ. 0.200.005 typ. 0.018.002 (4) plcs.
|
